What load capacities do your systems support?
Most systems are designed for 2,000–3,000 kg per vehicle (standard passenger cars/SUVs). Higher capacities can be engineered for heavier vehicles, including EVs, with adjustments to platform design and structural loading.
What are typical system footprints and clearances?
Footprints vary by system type (puzzle, tower, pallet, etc.), but all are designed to minimize ramps and drive aisles. Clearances are optimized for vehicle height, turning radii, and transfer areas, often reducing overall building volume compared to conventional parking.
How are Wohr systems integrated into building design?
Integration begins at concept stage, aligning grid, core placement, and circulation. Close coordination with structural and MEP teams ensures efficient layouts, proper load transfer, and seamless user access via transfer cabins or entry bays.
What structural requirements are needed?
Systems typically require reinforced concrete slabs, defined point loads, and in some cases pits or vertical shafts. Structural engineers must account for static and dynamic loads, including equipment, vehicles, and operational forces.
What codes and standards do systems comply with?
Systems are designed to meet local building and fire codes and align with DIN EN 14010. In Ontario, this standard is recognized and applied under Technical Standards and Safety Authority (TSSA) jurisdiction, along with relevant ISO and machinery safety requirements. Compliance is coordinated to meet all applicable local approvals.
What are power and energy requirements?
Powered by electric motors and control systems, with demand depending on system size and usage frequency. Energy consumption is generally lower than conventional garages due to reduced lighting, ventilation, and idle vehicle operation.
How is ventilation handled in automated parking?
Ventilation demand is significantly reduced because vehicles are not driven داخل the system. Air exchange is typically only required in transfer areas, simplifying mechanical design and lowering operational energy costs.
What are fire and life safety provisions?
Systems incorporate fire detection, suppression interfaces, and emergency access in line with local codes. Since parking is automated, human occupancy is minimal, which can simplify certain life safety requirements.
How are systems controlled and monitored?
Systems use PLC-based controls with intuitive user interfaces (touch panels, RFID, apps). Remote diagnostics and monitoring enable predictive maintenance and operational oversight.
What are typical installation timelines?
Installation can range from several weeks to a few months, depending on system complexity and scale. Off-site prefabrication helps streamline on-site assembly and reduce construction time.
Can systems be phased with construction schedules?
Yes, modular configurations allow phased installation aligned with building construction or occupancy needs. Systems can also be expanded later if space planning allows.
What are noise and vibration levels?
Noise and vibration are minimized through engineered components, isolation mounts, and smooth motor controls. Levels are typically suitable for residential and mixed-use developments.
How is redundancy and fail-safe operation handled?
Systems include backup power options, manual override procedures, and redundant components where required. Safety logic ensures vehicles can be retrieved safely during faults or outages.
What maintenance specs should be planned?
Preventive maintenance includes regular inspections, lubrication, and system checks. Digital monitoring can flag wear or faults early, helping maintain uptime and extend system lifespan.
What are typical CAPEX and lifecycle costs?
Initial costs are higher than conventional parking, but savings come from reduced excavation, smaller footprints, and increased leasable area. Lifecycle costs are predictable with planned maintenance.
How do systems impact GFA and parking ratios?
By eliminating ramps and reducing circulation space, systems free up valuable floor area. This can improve project feasibility, increase unit yield, or enhance amenity space.
What BIM/Revit resources are available?
Detailed BIM models, CAD drawings, and technical documentation are provided to support coordination, clash detection, and design development.
What are ingress and egress requirements?
Systems require designated transfer areas sized for safe and efficient vehicle entry/exit. Layouts are designed to ensure intuitive user flow and minimal queuing.
How are EV charging solutions integrated?
EV charging can be incorporated at parking platforms or transfer areas, depending on system type. Load management strategies are used to balance electrical demand across multiple vehicles.
Why Automated Parking?
Smarter parking solutions for modern urban development. Maximize density, reduce excavation costs, and create more efficient projects with intelligent parking systems.
Discuss Your Project